Bruno Carolift 100

Lift power and reach, at the touch of a button

We designed the Carolift® 100 hoist to be simple to use yet powerful enough to lift any wheelchair, scooter or other mobility device weighing up to 100 kg into the boot of your car. You control the hoist via an intuitive four-button hand control, and it does its job in about a minute.

The Carolift 100 is made in Sweden and crash tested for your safety.

Powered operation

Via the hand control, the Carolift 100 hoist does all the heavy work for you. It lifts and rotates the cargo into the boot of your car. All you need to do is lend a slight guiding hand.

Quick operation

The Carolift 100 hoist does its job very quickly. Loading or unloading your mobility device can be done in around a minute. All movement is at a smooth and constant pace, you’ll be in total control all the time.

Easy to use

The clever design of the Carolift 100 shines through in its ease of use. Open your boot, deploy the lift over your mobility device and lower the lift arm. Once within reach, you connect the clever lifting straps. Use as much slack as you need to fit the buckle on the mobility device. Pulling on the loop will tighten both sides simultaneously. Don’t worry if the strap is longer on one side. The Carolift 100 will self-balance the load as soon as it leaves the ground.

To stow the cargo into your vehicle, simply push the designated button while gently guiding your mobility device to the correct place.

Hand control

As a four-way hoist, the Carolift 100 can move: up, down, in and out. Controlling the hoist is precise and direct. The four-button hand control is very easy to use. Clear markings on the buttons describe what action the hoist performs when pressed.

A hand holding a smart phone showing four buttons on the display with arrows in each direction.

Smartphone compatible

You can also control the Carolift 100 with your smartphone via our Remote app. This requires fitting your Carolift 100 with the BraunAbility Remote receiver kit.

Lifts up to 100 kg

The Carolift 100 will lift any mobility device weighing up to 100 kg. That doesn’t mean that your mobility device must be on the higher end of the scale. The Carolift can be just as good a match to a 20 kg mobility device as to a 95 kg mobility device.

Full seat capacity

Since the Carolift 100 installs in the luggage compartment, you don’t have to sacrifice any seats to fit the hoist. This, of course, requires that your mobility device fits into the boot of your car. It's worth noting that it's possible to partially dismantle many scooters and power chairs to make them fit into the boot of a car.

Universal fit

The Carolift 100 is suitable for use with most car models and makes. The most important thing is, of course, that your mobility device will fit in the boot of the car. Luckily, it's often possible to dismantle wheelchairs, scooters and power chairs to make them smaller for transportation.

Space efficient

Another design feature of the Carolift 100 is space efficiency. In other words, to take up as little space in your car as possible and leave more room for your mobility device. If you need to use the boot to transport other things, you can also fold the lifting arm snugly toward the interior walls.

Detachable

To maximise the available space in your car's boot, you can easily remove the majority of the Carolift 100. It's easy and takes very little time. The detachable part weighs around 10 kg. After removing the top of the hoist, all that remains of the Carolift 100 is a slim black post.

Future-proof

We know physical conditions will change for some people. For instance, a different mobility device could become necessary. Others might want or need to get a new car. Providing everything fits and stays within the lifting capacity, your Carolift 100 should fit both your new mobility device as well as your new.

Dimensions

Hoist height	500 mm
Foot width	220 mm
Foot length	220 mm
Lifting device width	350-550 mm
Swivel degree	360°

Power

Voltage: 12 V

Weights

Load capacity*	80 or 100 kg
Hoist (incl. foot and electrical kit)	15 kg
Hoist (excl. foot and electrical kit)	10 kg
Mounting kit	7.8 kg
Total weight	22.8 kg

* Depends on configuration

Testing

• Cycle test approved (31,200)
• Crash test approved
• Climate test approved
• EMC test approved
• Flammability test approved

The importance of after sales support and service

After sales support is one of the most important considerations of a purchase process. when it comes to buying mobility equipment that you depend on for getting out and about.

For your added peace of mind 5star mobility provide you with a complimentary 24/7 breakdown service for the first 12 months should you ever have the need.

Market-Leading Experience

Since we were founded, more than 15 years ago, we focused solely on electric mobility scooters and power chairs, acquired unique expertise in this field our 5-star team drive to bring continuous meaningful improvements to our range of scooters, power chairs and other equipment,

Innovative Technology

All our products we offer for sale stands out for their unique design made to create maximum protection & Safety for the driver together with classic styling and premium high-end looks.

Safety Is Our Priority

We make sure that our scooters Consists of safety features, meet the toughest European and US safety standards, are FDA-approved, and comply with the EN-12184 requirements.

Complete Confidence in Our Products

With a proven track record of long-lasting reliability, we are confident to offer one of the most comprehensive warranty policies in the market today.

Quality Is Our Standard

We try to create an outstanding user experience by giving extra attention to ergonomic design, easy -to-use controls, adjustable suspension, orthopaedic seating, generous leg room.

5 Star Service / After Sales Service

An inhouse technical support team and outstanding availability of spare parts all around Australia has made 5-star mobility scooters well known for responsive, professional service.